Swann H.264 User Manual download pdf (Page 26)

Remember: After making changes to the settings press/click the APPLY button.

Frame Rate: How many frames per second (FPS) the DVR records. “Real-time” is 25 fps

(PAL) or 30 fps (NTSC). However, even lower frame rates are okay - even 3fps is still the

equivalent of three photographs per second.

Frame Rate - Fixed or Manual: If the FPS setting is “xed”, then the DVR will

automatically adjust the frame rate to a xed value, determined by the resolution

you’re recording at. The xed framerate values will ensure there is always enough

spare “frames” available. If you choose, you can manually set the frame rates for all

channels. Doing so is an advanced option and only recommended for experienced

users. However, it will allow you to more economically distribute the available

framerate across all your channels, and use more of the available processing

capability of the DVR.

Resolution: How many little dots (called “pixels”) make up your image. More pixels

mean a better looking and more detailed image. However, the DVR can only process

so many of pixels at once, so increasing the resolution means you’ll need to lower

your Frame Rate (FPS). There are four settings: D1 (the highest - the same resolution

as a DVD), HD1 (literally “half D1”) and CIF (one quarter of D1).

Schedule: Where you can program the DVR to record constantly or automatically

(upon detecting motion or alarm events) at the times you’d like. Click or select the

SCHEDULE button to program it (see “The Recording Schedule” on page 25).

Copy: Quickly apply the settings you’ve chosen for this channel to any or all other

channels.

Manual Frame Rate Conguration

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 75 76

No comments

Swann H.264 User Manual Page 26