Swann H.264 User Manual download pdf (Page 10)

8

Layout of the DVR4-2600

1 2 3 4 6 7 8

9

5

10 11 12 13 15 16 17 18 1914

1) Power Indicator: This LED is

illuminated when the DVR is connected

to power and switched on.

2) Infrared Sensor: Monitors signals

coming from the infrared remote control.

If this sensor is blocked or obstructed,

then the functionality of the remote will

be impaired.

3) Hard Drive Indicator: Lights up

when the hard drive is active. It will ash

rapidly when recording or searching (in

time with the read/write cycles).

4) Menu/ESC: One of the primary

controls for navigating through the

menus. When in live-viewing mode, it

will enter the main menu. When pressed

in the main menu, it will return the DVR

to live-viewing mode. Finally, when in a

submenu, this button will return you to

the main menu.

5) PTZ: Opens the Pan, Tilt, Zoom pop-

up menu. This is used to control PTZ

capable camera systems, and will not

aect standard cameras.

6) CH+: Moves “up” one channel.

7) CH-: As 6, but descends one channel.

8) Display (All) Mode: Enters split-

screen multi-view. The whole screen

is split into four or nine sections, each

displaying the images from one camera.

Press multiple times to cycle through all

available viewing modes.

9) Rewind: During playback, this will

reverse the footage. Press multiple times

to increase the speed of the reversing.

When navigating through menus, this

button will move the cursor to the left.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 75 76

Comments to this Manuals

No comments