Swann H.264 User Manual download pdf (Page 50)

Remember: After making changes to the settings press/click the APPLY button.

Buzzer: Whether the internal alarm speaker inside the DVR is enabled

or not. When set to OFF, the buzzer will not sound under any

circumstances.

You can choose which types of alarm events will trigger the buzzer

by selecting or deselecting the rst tick box next to the type of

alarm event you want to trigger the buzzer.

We suggest leaving the buzzer enabled, and having it sound on

HDD Loss, HDD Space and Video Loss alarm events. This way, the

DVR will give you a warning if its operation is compromised (either

it is unable to record more footage, or there is no incoming video

feed to record).

MD Alarm: Whether the DVR’s Motion Detection function will trigger an alarm

event. Note that this can be set independently of the Motion-based

recording, which is controlled via the Schedule (page 25) and

motion detection conguration (page 27) menus.

HDD Loss: Will trigger an buzzer/email if the hard drive stops functioning.

HDD Space: Will trigger an buzzer/email when the hard drive is out of space.

Video Loss: Will trigger an buzzer/email when a camera stops supplying

images.

Email: See “Auto Email Setup Menu” on page 49.

Post-Recording: How long the DVR will continue to record after an alarm event

(such as motion) occurs.

Pre-Record: Allows the DVR to save a short amount of footage taken before

an event actually occurs. This can be particularly useful for video

loss alarms, as you might just catch who or what caused this alarm

event!

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 75 76

No comments

Swann H.264 User Manual Page 50