Swann H.264 User Manual download pdf (Page 4)

FCC Verication

NOTE: This equipment has been tested and found to comply with the limits for Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio or television reception, which can be determined by turning the equipment o and

on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and the receiver

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is

connected

• Consult the dealer or an experienced radio/TV technician for help

These devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. These devices may not cause harmful interference, and

2. These devices must accept any interference received, including interference that may cause

undesired operation.

IMPORTANT NOTE:

All jurisdictions have specic laws and regulations relating to the use of cameras. Before using any

camera for any purpose, it is the buyer’s responsibility to be aware of all applicable laws and regulations

that prohibit or limit the use of cameras and to comply with the applicable laws and regulations.

FCC Regulation (for USA): Prohibition against eavesdropping

Except for the operations of law enforcement ocers conducted under lawful authority, no person shall

use, either directly or indirectly, a device operated pursuant to the provisions of this Part for the purpose

of overhearing or recording the private conversations of others unless such use is authorized by all of the

parties engaging in the conversation.

WARNING

Modications not approved by the party responsible for compliance could void user’s authority to

operate the equipment.

IMPORTANT SAFETY INSTRUCTIONS

• Make sure product is xed correctly and stable if fastened in place

• Do not operate if wires and terminals are exposed

• Do not cover vents on the side or back of the DVR and allow adequate space for ventilation

DEFAULT PASSWORD INFORMATION

To ensure your privacy, this DVR supports password protection.

• The default, all-access username is “admin”. If the DVR asks you to log in before you’ve set a

password, enter admin as your username and leave the password blank. This will give you access to

all areas of the DVR.

• There is no “default” password - until you set a password and enable password protection, the DVR

will not ask you for one.

• To ensure your ongoing privacy, we strongly recommend setting a password as soon as possible.

Choose something that you’ll remember, but that others would be unlikely to guess.

• If you do manage to lock yourself out of the DVR, you’ll need to contact us at the Swann Technical

Support Telephone Helpdesk - the number is on the back cover.

Before you begin

1 2 3 4 5 6 7 8 9 ... 75 76

Comments to this Manuals

No comments

Swann H.264 User Manual Page 4

Comments to this Manuals

Related products and manuals for Digital Video Recorders (DVR) Swann H.264