Swann 1060 User Manual download pdf (Page 4)

Connecting your Camera

Installing a Camera

Connect the Video and Power

wires you passed through the seal

plug to your camera. Connect

the opposite end of the cables to

a video viewing device and

check for correct operation.

Insert the cables for

the Camera Power,

Camera Video and

Heater / Blower

through the seal plug

on the underside of

the back end of the

1060 housing and

pass the cables

through in to the

housing. Once this is

done tighten the nuts

on the seal to

prevent moisture and

dust entering.

Fit your CCTV camera to the

camera mounting plate

using the supplied mounting

screw or the screws that may

have come with your

camera

Fit the camera mounting plate back into the mounting rails

at the bottom of the housing and push down firmly until it

clicks into place. Make any necessary adjustments to the

distance from the glass or angle of the camera then screw

in the supplied mounting screws to stop the mounting

plate from moving.

1 2 3 4

No comments

Swann 1060 User Manual Page 4