Swann PRO-660 User Manual download pdf (Page 4)

Connection Guide

1. Connect the DC in plug on the

camera cable to the DC out pin

on the end of the extension cable.

2. Connect the BNC connector on

the camera cable to the BNC

connector on the extension cable.

3. Plug the green RS485 plug on

the end of the camera cable to

the RS485 port on the extension

cable. You may need to connect

the two wires to the RS485 plug.

(See insert, above right).

4. Plug the RS485 connector on the far end of the extension cable into the PTZ

controller. As with step 3, the plug may have to be connected to the wire

terminals.

5. Connect the BNC Output on the end of the extension cable to your video

monitoring/recording device (typically a DVR).

6. Connect one output from the power splitter to the DC in plug on the end of

the extension cable.

7. Connect the other output of the power splitter to the DC in plug on the OSD

controller.

8. Connect the power splitter’s DC in plug to the DC output jack on the power

adapter, and connect the power adapter to a wall socket.

1 2 3 4 5 6 7 8 9 ... 19 20

No comments

Swann PRO-660 User Manual Page 4