Swann SW212-HXD User Manual download pdf (Page 7)

Troubleshooting Guide

Technical Specifications

Problem: I can’t see the camera on my TV.

Solution: Ensure the camera is plugged in and the TV or VCR is tuned to the

correct input channel.

Problem: When I view my camera at night I only see a bright spot and no image.

Solution: Night Vision will reﬂect when shining through a window. Move the

camera to the other side of the window or another location.

Problem: The BNC Extension Cable will not connect to my TV.

Solution: Connect the BNC to RCA adapter to the end of the Extension Cable

and plug into the TV.

Problem: On my Swann DVR, Video Loss appears where my camera should be.

Solution: Check the Extension cable is securely connected to the camera and

check the connection is secure on the back of the DVR. Also ensure the camera

has power by trying a second power outlet.

Video

Image Sensor 1/3” Color Super CMOS

Video Quality 400 TV Lines

Number of Effective Pixels NTSC: 510 x 492 / PAL: 628 x 582

Minimum Illumination 0 Lux (IR on)

Day/Night Mode Color during day / switches to B&W night

White Balance Automatic

Signal / Noise Ratio > 50dB

Electronic Shutter 1/60 - 1/15,000 NTSC / 1/50 - 1/15,000 PAL

Gain Contr=ol Automatic

Backlight Compensation Yes

Lens 6mm

Viewing Angle 53 degrees

Night Vision

Number of Infra-Red LEDs 30

Infra-Red Wavelength 850nm

Night Vision Distance Up to 30ft / 9m

Infra-Red LED Life 10,000 hours

General

Operating Power DC 12V

Operating Temperature -10°C ~ 50°C / 14°F ~ 122°F

Body Construction ABS Plastic

Dimensions - Camera 5.5” x 2.8” x 2.8” / 140mm x 70mm x 70mm

Dimensions – Stand 4.5” x 2.3” x 2.3”/ 120mm x 60mm x 60mm

Weight – Camera & Stand 0.5lbs / 235g

1 2 3 4 5 6 7 8

No comments

Swann SW212-HXD User Manual Page 7